CHEMIPEARL™

Polyolefin-based Aqueous Dispersion

CHEMIPEARL™, which is made of fine particles of polyolefin, uses Mitsui Chemicals’ unique technology and is an environment-friendly aqueous dispersion that does not use emulsifying agents or organic solvents (except for some grades and Products in Development).

 

Abrasion resistant Improved slip properties Anti-blocking agent Superior application properties Outstanding heat-sealing properties Hygienic qualities


Applications detail

Additives for printing ink, heat sealants

BASIC INFORMATION

CHEMIPEARL™ is a particulate aqueous dispersion developed by Mitsui Chemicals, Inc. It is a unique product made of fine particles of polyolefins, which were previously considered to be extremely difficult to disperse in water. When compared with widely used aqueous dispersion techniques, CHEMIPEARL™ is unique in that it does not use emulsifying agents or organic solvents, making it highly environmentally friendly. The characteristics of polyolefins, such as its mechanical, water-resistant, and chemical resistant properties, remain intact, making the product ideal for widespread use as printing ink additives, heat sealing for food packaging, adhesives and binders, and anti-blocking agents.

Aqueous Dispersion

Efficient aqueous dispersion polyolefin that does not require emulsifying agents or organic solvents.

Abrasion Resistant

Spherical particles with a narrow particle size distribution, resistant to abrasions with excellent slip and anti-blocking properties. (A, M, V, W types)

Magnification of CHEMIPEARL™ Magnification of CHEMIPEARL™
Superior Application Properties

Can be applied to paper, aluminum, films, etc. by spray or gravure coating. (A, M, V, S types)

Heat Sealing Properties

Offers polyolefin’s excellent mechanical, water-resistant and chemical-resistant properties. When baked after application, it becomes a non-directional, odorless film with outstanding heat-sealing properties. (A, M, V, S types)

Hygienic Qualities

Polyolefin material with superior hygienic qualities, enabling its use in food packaging. (M, V, S types)

Heat sealing agent, additive in coating agents, printing inks

Grades and Applications of CHEMIPEARL™
Grades and Applications

CHEMIPEARL™ GRADES AND APPLICATIONS ( A Type / M Type / S Type / V Type )
spec001_en.gif
CHEMIPEARL™ GRADES AND APPLICATIONS ( W Type )
spec002_en.gif

Additives for Printing Inks
Abrasion resistant characteristics of CHEMIPEARL™

1.Particles project above the surface of the ink.

2.In the rub-off test,particles are spread on the surface of the ink.

3.Soft wax dispersion has excellent rub-off resistance *1,but gives low slide angle.

Before Abrasion Test Before Testing
After Abrasion Test After Testing
CHEMIPEARL™’s Resistance to Abrasion

High abrasion resistant qualities with minimum application

Thickness of Coating

Amount Of
Coating
0.2%0.5%1.0%
CHEMIPEARL™
W410
CHEMIPEARL™
W400
Wax Dispersion of Competitive Product
Non-Applied Surface

Abrasion Test using red ink. (Weight: 4 lbs / Friction Times: 120 rubs)

CHEMIPEARL™ W Grade Distribution
CHEMIPEARL™ W Grade Distribution
Heat sealing applications of CHEMIPEARL™
Heat sealing applications of CHEMIPEARL™
Chemipearl™ S Al/Al Heat Seal Strength
Evaluation Results in Al/Al System AL Foil:40µm Coating Weight: 3.5-4.0 g/m2(dry) Drying Condition: 120°C×30sec Heat Sealing:2kg/cm2×1Sec Peeling Mode:T mode Peeling Speed:50mm/min
Chemipearl™ S and V Paper/Paper Heat Seal Strength
Evaluation Results in Paper/Paper System paper: 105 g/m2 Coating Weight: 3.5-4.0 g/m2(dry) Drying Condition: 120°C×30sec Heat Sealing:2kg/cm2×1Sec Peeling Mode:T mode Peeling Speed:50mm/min
Application of CHEMIPEARL™S
ケミパールSの使用例
ケミパールSの使用例
ケミパールSの使用例
CHEMIPEARL™ V Application for Anti-blocking Agents
Application for Anti-blocking Agents

CHEMIPEAL™ V

CHEMIPEAL™ V

CHEMIPEAL™ A

CHEMIPEAL™ A

PDF Catalog

Contact Us

Sales & Marketing Center
TEL +65-6534-2611
FAX +65-6535-5161